SatisFAXtion software Product Part Number Win 95 compatibility Notes Connection CoProcessor PCCB6001 Unknown Compatibility Connection CoProcessor MCA PSCB6100 Unknown Compatibility SatisFAXtion Classic PCCB6201 Unknown Compatibility SatisFAXtion Classic Upgrade Kit UPGRADEKIT Unknown Compatibility SatisFAXtion Classic MCA PSCB6202+ Unknown Compatibility SatisFAXtion/100 PCFM6301 Unknown Compatibility SatisFAXtion/300 PCFM6350+ Unknown Compatibility SatisFAXtion/350 PSFM6380 Unknown Compatibility ******************************************************************* http://members.tripod.com/Panteev/ ******************************************************************* Carbon Copy For Windows 1.0B &Amp; 2.0 For Intel Modems &Amp; Satisfaxtion Faxmodems According to Carbon Copy Technical Support, here are the configuration choices for Intel modems: If you have a: select: SatisFAXtion Modem/350 Intel 9600/14400 SatisFAXtion Modem/300 Intel 9600/14400 Upgraded SatisFAXtion Classic Intel 9600/14400 SatisFAXtion Classic Intel 2400EX MNP Intel 14.4EX Intel 9600/14400 Intel 9600EX Intel 9600/14400 Intel 2400 V.42 Modem Intel 9600/14400 Intel 2400 MNP Modem Intel 2400EX MNP Intel 2400 non-MNP Modem AT Compatible When using Carbon Copy 1.0B for Windows on a SatisFAXtion Modem/350, you need DOWNLOAD.400 version 3.02 or higher. Earlier versions of DOWNLOAD.400 didn't implement the Ring Indicator signal which Carbon Copy uses to detect incoming calls. Carbon Copy 2.0 for Windows contains a fix for the Ring Indicator problem. Carbon Copy Technical Support Phone Numbers BBS 617-762-5134 Tech Support 617-551-1414 Carbon Copy for DOS Test P617-551-1888 Above information valid as of 10/25/93. Compuserve Information Manager 1.22 This program is compatible with Intel modems. Configuring the Program: For Intel modems, configure the modem for COM1/IRQ4, COM2/IRQ3, COM3/IRQ4 or COM4/IRQ3. For Intel SatisFAXtion faxmodems, you can also configure the modem for COM3/IRQ5 or COM4/IRQ2 if your version of CIM supports these configurations. Early version of CIM do not support the COM3/IRQ5 and COM4/IRQ2 configurations, later versions do. Memory Resident Programs: Please note that if you're having problems loading CIM or maintaining a connection without system lockups with an Intel faxmodem, we suggest you disable/unload the FAX TSR programs FAXPOP and CASMGR or CASMODEM. *********************************************************************** *********************************************************************** Configuring Communications Software A-D -------------------------------------------------------------------------------- PLEASE NOTE: This product is no longer being manufactured by Intel. THIS DOCUMENT IS PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND IS SUBJECT TO THE TERMS SET FORTH IN THE "LEGAL INFORMATION" LINK BELOW. For information on currently available Intel products, please see www.intel.com and/or developer.intel.com. -------------------------------------------------------------------------------- Contents: Disclaimer Of Information Carbon Copy: Suggested Configuration For Intel Modems, Faxmodems, &Amp; Satisfaxtion Faxmodems Carbon Copy + 6.0: Configuration Carbon Copy For Dos V6.1 Cc:Mail Gateway: Suggested Configuration For Intel Faxmodems, Intel High Speed Modems Cc:Mail Remote 3.0 Carbon Copy For Windows 1.0B &Amp; 2.0 For Intel Modems &Amp; Satisfaxtion Faxmodems Carbon Copy Technical Support Phone Numbers Compuserve Information Manager 1.22 Bitcom 3.0 & 3.2: Compatible With Modem/100 Closeup 4.0: Compatible With Intel Modems, Intel Faxmodems, Satisfaxtion Modem/350 Commute (Pc Tools): Compatible With Satisfaxtion Classic Dow Jones 2.03: Compatible With Intel Modems &Amp; Satisfaxtion Modems Disclaimer Of Information This product has been discontinued. No further updates will be made to this documentation. This information was created during the product life cycle, use it at your own risk in today's environment. Carbon Copy: Suggested Configuration For Intel Modems, Faxmodems, &Amp; Satisfaxtion Faxmodems Note: Contact Carbon Copy Tech Support for information on upgrading to the latest version of Carbon Copy. Carbon Copy is compatible with Intel modems and faxmodems, but early versions didn't list Intel modem definitions. You can still use the those early versions by selecting the equivalent Microcom or Hayes modem or by downloading an updated modem definition file from the Microcom BBS. Configuring the Program: Here's how to configure Carbon Copy. Remove Carbon Copy from memory (if it has been loaded). Run the CCINSTALL program in the Carbon Copy directory. Select the appropriate modem type: 14.4EX, 9600EX, 2400 V.42bis 96) Intel 9600EX/14.4EX (Microcom AX Intel 2400B MNP modems Intel 2400EX MNP (Microcom AX 24) Intel non-MNP modems Microcom 2400 or Hayes 2400 144/144, 96/96, 24v/96 96) Intel 9600EX/14.4EX (Microcom AX 24/96i Microcom 2400 or Hayes 2400 4. Select the appropriate DTE rate: 14.4EX, 9600EX 38,400 (or higher) Intel 2400 V.42 modems 9,600 Intel 2400B MNP modems 4,800 Intel non-MNP modems 2,400 144/144 57,600 96/96 38,400 24v/96 9,600 24/96i 2,400 5. Press X to exit CCINSTALL and save the changes. For SatisFAXtion modems, set the fax and Carbon Copy to answer after the same number of rings. The SatisFAXtion fax will answer first and pass any non-fax calls to the data modem. Note: If you have trouble transferring files using an Intel High Speed Modem, contact Carbon Copy tech Support for assistance. Carbon Copy + 6.0: Configuration Intel Modems - Compatible - Here's how to configure Carbon Copy +. Run CCINSTAL and choose the communications port for the modem. Also set these options as indicated: Your Intel Modem Carbon Copy + Modem Choice Port rate 14.4EX, 9600EX Intel 9600EX 38400 Intel 2400 V.42bis modems Intel 9600EX 9600 Intel 2400B MNP modems Intel 2400EX MNP 4800 Intel non-MNP modems Hayes 2400 2400 144/144 Intel 9600EX 57600 96/96 Intel 9600EX 38400 24v/96 Intel 2400EX MNP 9600 24/96i Hayes 2400 2400 Carbon Copy For Dos V6.1 This program updates Carbon Copy + 6.0. Intel has not tested this program. According to Carbon Copy Technical Support, here are the configuration choice for Intel Faxmodems: Intel Faxmodem: Suggested Choice: Suggested Port Rate 144/144 Intel 14.4K Series 57600 96/96 Intel 9600EX V.42 38400 24v/96 Intel 9600EX V.42 9600 24/96 AT Compatible 2400 Intel 14.4EX Intel 14.4K Series * Intel 9600EX Intel 9600EX V.42 Intel 2400 V.42 Modem Intel 9600EX V.42 Intel 2400 MNP Modem Intel 2400EX MNP Intel 2400 non-MNP Modem AT Compatible SatisFAXtion Modem/350 Intel 14.4K Series* SatisFAXtion Modem/300 Intel 14.4K Series Upgraded SatisFAXtion ClasIntel 9600EX V.42 SatisFAXtion Modem/100 AT Compatible SatisFAXtion Classic Intel 2400EX MNP * This modem description is available in a file called MODEM2.DSC which you can download from the Carbon Copy BBS. Cc:Mail Gateway: Suggested Configuration For Intel Faxmodems, Intel High Speed Modems Lotus recommends that cc:Mail Gateway run on a dedicated workstation in a single-tasking environment. Multi-tasking environments introduce new variables that can interfere with asynchronous communications. Here is the cc:Mail Gateway command recommended by Lotus for Intel High Speed Faxmodems: GATEWAY database port 19200/LOCK MODEM/AT&FX3M0 Replace "database" with the drive and path for the cc:Mail database. Replace "port" with the COM port to which the modem is connected. The parameter "19200/LOCK" sets the port to 19200 baud and locks the baud rate. The parameter "MODEM/AT&FX3M0" initializes the modem to operate in the manner in which cc:Mail expects. Cc:Mail Remote 3.0 This program is compatible with Intel modems. Modem Setup Notes: For the SatisFAXtion Modem/350 and Upgraded SatisFAXtion Classic, run Setup and select a valid COM/IRQ combination. The valid combinations are COM1/IRQ4, COM2/IRQ3, COM3/IRQ4 and COM4/IRQ3. Because DOS communication applications do not let you use one IRQ for two COM ports, you can not use COM1 and COM3 at the same time, or COM2 and COM4. Let the SETUP program add this line to CONFIG.SYS: DEVICE=C:\FAX\SATISFAX.SYS IOADDR=0350 Run TESTCOM to test the modem port. Configuring the Program: Run the REMOTE.EXE program in the CC:MAIL subdirectory and select your modem from the menu (select "Hayes Compatible" if you don't see your modem.) Then choose "touch" or "rotary dial" as supported by your local phone company. Now you must select the speed that is best suited for your modem. Äëÿ 9600EX/14.4EX: Select 57600 Äëÿ Intel 2400 V.42bis & MNP Modems: Select 9600 Äëÿ other INTEL 2400 baud modems: Select 2400 --------------------------------- Then, select a COM port. CC:MAIL 3.0 will accept COM1 through COM4, but is only able to access the IRQ combinations as provided by the IBM specification. The valid combinations are COM1/IRQ4, COM2/IRQ3, COM3/IRQ4 and COM4/IRQ3. As noted in your Intel documentation, duplicate use of any IRQ is not allowed for a DOS communications application. Thus, if you have COM1 and COM2 installed, then COM3 & COM4 (which use the same IRQ's) will not be valid choices for a Classic Bus system. Additional Command line parameters are also available as outlined in Appendix G. ---------------------------------------------------------------- Lotus suggests using the following cc:Mail Remote command lines: Äëÿ Intel 14.4/14.4e Faxmodem: REMOTE COMM/LOCK MODEM/AT\C1\V3 Äëÿ Intel upgraded SatisFAXtion Classic: REMOTE Äëÿ Intel 14.4ex Modem: REMOTE COMM/LOCK MODEM/AT\V3 Carbon Copy For Windows 1.0B &Amp; 2.0 For Intel Modems &Amp; Satisfaxtion Faxmodems According to Carbon Copy Technical Support, here are the configuration choices for Intel modems: If you have a: select: SatisFAXtion Modem/350 Intel 9600/14400 SatisFAXtion Modem/300 Intel 9600/14400 Upgraded SatisFAXtion Classic Intel 9600/14400 SatisFAXtion Classic Intel 2400EX MNP Intel 14.4EX Intel 9600/14400 Intel 9600EX Intel 9600/14400 Intel 2400 V.42 Modem Intel 9600/14400 Intel 2400 MNP Modem Intel 2400EX MNP Intel 2400 non-MNP Modem AT Compatible When using Carbon Copy 1.0B for Windows on a SatisFAXtion Modem/350, you need DOWNLOAD.400 version 3.02 or higher. Earlier versions of DOWNLOAD.400 didn't implement the Ring Indicator signal which Carbon Copy uses to detect incoming calls. Carbon Copy 2.0 for Windows contains a fix for the Ring Indicator problem. Carbon Copy Technical Support Phone Numbers BBS 617-762-5134 Tech Support 617-551-1414 Carbon Copy for DOS Test P617-551-1888 Above information valid as of 10/25/93. Compuserve Information Manager 1.22 This program is compatible with Intel modems. Configuring the Program: For Intel modems, configure the modem for COM1/IRQ4, COM2/IRQ3, COM3/IRQ4 or COM4/IRQ3. For Intel SatisFAXtion faxmodems, you can also configure the modem for COM3/IRQ5 or COM4/IRQ2 if your version of CIM supports these configurations. Early version of CIM do not support the COM3/IRQ5 and COM4/IRQ2 configurations, later versions do. Memory Resident Programs: Please note that if you're having problems loading CIM or maintaining a connection without system lockups with an Intel faxmodem, we suggest you disable/unload the FAX TSR programs FAXPOP and CASMGR or CASMODEM. Bitcom 3.0 & 3.2: Compatible With Modem/100 Tested by Intel Intel's lab tested this software with the SatisFAXtion/100 board, and it is compatible. Closeup 4.0: Compatible With Intel Modems, Intel Faxmodems, Satisfaxtion Modem/350 Tested by Intel Intel tested Closeup 4.0 with the SatisFAXtion Modem/350, and it is compatible. Intel was able to take control of a remote PC, chat between PCs, and transfer files from the host PC to the remote PC. Here's how Intel configured Close Up: Run SUPPORT.EXE and: Select the comparable Intel Modem or SatisFAXtion Modem from the list. Set the port speed to the maximum DTE rate for your faxmodem. Intel Faxmodem Intel Modem SatisFAXtion Modem Max. DTE Rate 14.4EX 14.4EX/9600EX Modem/350 57600 9600EX 14.4EX/9600EX Modem/350 38400 2400 v.42 9600EX Uggraded Classic 9600 2400 MNP 9600EX Upgraded Classic 9600 2400 non-MNP 2400B/2400-EX Classic 2400 Set the port speed to maximum DTE rate (see legend below). Reset the modem using the command AT&F . Use the Terminal Emulation option of Intel's TESTCOM program to configure the faxmodem using the command: AT&FS0=1&W Start Closeup as indicated in the Closeup documentation. Note: If you want the modem to use a volume setting lower than L2, add "L1" or "L2" following the "AT&F" in the init string. To change the init string, select "Modems", select the modem you're using, then edit the init string. Intel recommends setting AUTOBAUD=OFF when using Close Up with the SatisFAXtion Modem/350. If you use Close Up in Leased Line Mode, be sure to disable the inactivity timer. Commute (Pc Tools): Compatible With Satisfaxtion Classic This PC Tools communication utility is compatible with the SatisFAXtion board. If you're having trouble getting COMMUTE to work, you may need a newer version of the program. One version of PC Tools did not include all the files necessary for COMMUTE to operate. Contact Central Point Software for an upgrade to your software. ********************************************************************** ********************************************************************** Dow Jones 2.03: Compatible With Intel Modems &Amp; Satisfaxtion Modems The Dow Jones 2.03 program is compatible with Intel Modems and SatisFAXtion faxmodems. Configuring the Program: To configure the program, run the MAP program then: In the Data Maintenance window, select Setup System. Press Y in answer to the question, "Do you want to make any changes now?" Under Communications Parameters: Highlight Com Port and select the port to which the modem is attached. Press 1 for COM1, 2 for COM2) Highlight Modem Type and select the correct modem type for your modem: If you have a: Do this: 144/144, 96/96, 24v/96 press O to select Other. 24/96i press H to select Hayes. Intel V.42bis modems press O to select Other. Intel 2400B MNP modems press O to select Other. Intel non-MNP modems press H to select Hayes. Upgraded SatisFAXtion Classic, SatisFAXtion Modem/300, Modem/350 press O to select Other. SatisFAXtion Classic press O to select Other. Modem/100 press H to select Hayes. Highlight Baud Rate and press 2 to select 2400. If you have a 2400 Baud non-MNP modem or Intel 24/96i faxmodem, you're done. If you have a 14.4EX, 9600EX, or 2400 Baud MNP modem, press ESC to configure modem command strings. Highlight Modem Reset and enter the correct reset string for your modem: 14.4EX, 9600EX, 2400 V.42bis): ,+++,AT&F\J1\N0\Q0[13] Intel 2400B MNP modems: ,+++,AT&F\J1\N0\Q0[13] Upgraded SatisFAXtion Classic, SatisFAXtion Modem/300, 350: ,+++,AT&F\J1\N0\Q0[13] SatisFAXtion Classic: ,+++,AT&F\J1\N0\Q0[13] Press ENTER. Just press ENTER at the Modem Dial, Acknowledge, or Hang up strings to leave them unchanged. ********************************************************************* *********************************************************************