Section: LED drivers
Charge pump
Back to Contents page
|
Section: LED drivers
|
Back to Contents page |
| Manufacturer | Type | Information | channels | Vinput | fractional conversion | output current/LED |
| AustriaMicroSystems | AS3685A - Ultra-small, simple and safe, charge pump based 700mA Flash LED driver | AS3685_Features.pdf | 1 | 1x, 1.5x, 2x | 700mA | |
| Linear Technology | LTC3202 - Low Noise, Fractional White LED Driver | 3202fa.pdf | 1 | 2.7 to 4.5V | 1.5x | 125mA |
| LTC3202 - Sep 2001 LTC3202 Charge Pump Improves Efficiency for Powering White LEDs | LTC3202_0901_Mag.pdf | 1 | ||||
| Linear Technology | LTC3214 - 500mA Camera LED Charge Pump | 3214fb.pdf | 1 | 2.9 to 4.5V | 1x, 1.5x, 2x | 500mA |
| Linear Technology | LTC3215 - Constant Frequency Charge Pump with Independent Torch (350mA)/Flash (700mA) Current Control | 3215fb.pdf | 1 | 2.9 to 4.4V | 1x, 1.5x, 2x | 1000mA |
| Linear Technology | LTC3216 - Constant Frequency Charge Pump with Independent Torch (500mA)/Flash (1A) Current Control | 3216fc.pdf | 1 | 2.9 to 4.4V | 1x, 1.5x, 2x | 1500mA |
| LTC3216 - DC805A - LTC3216 Evaluation Kit | dc805A.pdf | 1 | ||||
| LTC3216 - DN1009 - Tiny, Efficient High Power LED Camera Flash Solutions for Cell Phone Applications | dn1009f.pdf | 1 | ||||
| Linear Technology | LTC3218 - 400mA Single Wire Camera LED Charge Pump | 3218fb.pdf | 1 | 2.9 to 4.5V | 1x, 2x | 400mA |
| LTC3218 - Oct 2007 - Single-Wire Camera LED Charge Pump Allows Multiple Output Current Levels With Single-Resistor Programmability | LTMag-V17N03-13-LTC3218-Jafri.pdf | 1 | ||||
| Maxim | MAX1577Y, MAX1577Z - 1.2A White LED Regulating Charge Pump for Camera Flashes and Movie Lights | MAX1577-MAX1577Z.pdf | 1 | 2.7 to 5.5V | 1x, 2x | 1200mA |
| Maxim | MAX1910, MAX1912 - 1.5x/2x High-Efficiency White LED Charge Pumps | MAX1910-MAX1912.pdf | 1 | 2.6 to 5.3V | 1.5x, 2x | 120mA |
| MAX1910, MAX1912 - Application Note - Charge-Pump and Step-Up DC-DC Converter Solutions for Powering White LEDs in Series or Parallel Connections | AN1037.pdf | 1 | ||||
| MAX1910, MAX1912 - Application Note - Driving LEDs in Battery-Operated Applications: Controlling Brightness Power Efficiently | AN1804.pdf | 1 | ||||
| MAX1910, MAX1912 - Application Note - Standard and White LED Basics and Operation | AN3070.pdf | 1 | ||||
| MAX1910, MAX1912 - Application Note - Why Drive White LEDs with Constant Current? | AN3256.pdf | 1 | ||||
| ON Semiconductor | NCP5603 - High Efficiency Charge Pump Converter / White LED Driver | NCP5603-D.PDF | 1 | 2.7 to 5.5V | 1x, 1.5x, 2x | 200mA |
| NCP5603 - Application Note - Charge Pump Based Multiple LED Driver | AND8192-D.PDF | 1 | ||||
| Semtech | SC1462 - High Output Current Charge Pump Doubler | SC1462.pdf | 1 | 1.65 to 5.5V | 2x | 80mA |
| Semtech | SC1462A- High Efficiency Charge Pump Doubler | sc1462a.pdf | 1 | 1.65 to 5.5V | 2x | 25mA |
| Semtech | SC600 - mAhXLife™ Charge Pump LED Driver with 5.0V, 4.5V or 4.0V Output | SC600.pdf | 1 | 2.7 to 6.5V | 1x, 1.5x, 2x | 120mA |
| Semtech | SC603 - Charge Pump Regulator with Selectable 5.0V/4.5 V Output | sc603.pdf | 1 | 2.7 to 6.5V | 200mA | |
| Semtech | SC605 - Charge Pump / Flash LED Driver | SC605.pdf | 1 | 3 to 5.25V | 2x | 500mA |
| Semtech | SC613- Low-Noise Regulated Charge Pump with Selectable Output | sc613.pdf | 1 | 2.7 to 6.5V | 140mA | |
| Semtech | SC615 - Charge Pump / Flash LED Driver | sc615.pdf | 1 | 3 to 5.25V | 2x | 500mA |
| Semtech | SC615A - Charge Pump / Flash LED Driver | SC615A.pdf | 1 | 3 to 5.25V | 2x | 500mA |
| Semtech | SC618 - Charge Pump Flash LED Driver with Safety Timer | SC618.pdf | 1 | 3 to 5.25V | 700mA | |
| Semtech | SC619 - Charge Pump Flash LED Driver with Safety Timer | SC619.pdf | 1 | 3 to 5.25V | 700mA | |
| Semtech | SC635 - Charge Pump / Flash LED Driver | SC635.pdf | 1 | 3 to 5.25V | 200mA | |
| Toshiba | TCA62753FUG - Charge Pump type DC/DC Converter for White LED Driver | TCA62753FUG_en_datasheet_061025.pdf | 1 | 3 to 5.5V | 100mA | |
| ↑ | ||||||
| Catalyst Semiconductor | CAT3612 - Programmable 300mA Camera Flash LED Driver | 3612.pdf | 2 | 3 to 5.5V | 1x, 1.5x | 150mA |
| CAT3612EVAL1 Evaluation Board for CAT3612 Camera Flash LED Driver | an31.pdf | 2 | ||||
| Monolithic Power Systems | MP3011 - High Efficiency Charge Pump 2 White LED Driver | MP3011_r1.2.pdf | 2 | 2.5 to 5.5V | 1x, 1.5x, 2x | 40mA |
| ON Semiconductor | NCP5602MUTBG - 2-Channel Charge Pump White LED Driver with I2C Control | NCP5602-D.PDF | 2 | 2.7 to 5.5V | 1x, 1.5x | 30mA |
| NCP5602MUTBG - Application Note - Controlling the NCP5602 with the I2C Software | AND8267-D.PDF | 2 | ||||
| ON Semiconductor | NCP5612 - 2-Channel Charge Pump White LED driver with S-Wire Link Control | NCP5612-D.PDF | 2 | 2.7 to 5.5V | 1x, 1.5x | 30mA |
| NCP5612 - Application Note - Implement the Single Wire Protocol | AND8264-D.PDF | 2 | ||||
| ↑ | ||||||
| Catalyst Semiconductor | CAT3603 - 3-Channel LED Driver in 3x3mm Package | 3603.pdf | 3 | 3 to 5.5V | 1x, 1.5x | 30mA |
| Catalyst Semiconductor | CAT3643 - 3-Channel Ultra High Efficiency Quad-Mode® LED Driver | 3643.pdf | 3 | 2.4 to 5.5V | 1x, 1.33x, 1.5x, 2x | 32mA |
| CAT3643 - CAT3644 - Demonstration/Evaluation Board for CAT3643/3644 Quad-Mode® LED Driver | an34.pdf | 3 | ||||
| Catalyst Semiconductor | CAT3647 - 3-Channel Ultra High Efficiency Quad-Mode® LED Driver with 32 Dimming Levels | 3647.pdf | 3 | 2.4 to 5.5V | 1x, 1.33x, 1.5x, 2x | 30mA |
| CAT3647/3648 LED Driver Demonstration Board | AN37.pdf | 3 | ||||
| Fairchild Semiconductor | FEB175 - Evaluation Board Featuring FAN5617, High Efficiency, Constant Current LED Driver with Adaptive Charge Pump and the TinyWire Single-Wire Control | FEB175.pdf | 3 | |||
| Linear Technology | LTC3212 - RGB LED Driver and Charge Pump | 3212fb.pdf | 3 | 2.7 to 5.5V | 1x, 2x | 25mA |
| LTC3212 - Jan 2008 - Entire RGB LED Driver Fits in Miniscule 3mm × 2mm Package | LTMag-V17N04-10-LTC3212-ZLewko.pdf | 3 | ||||
| Maxim | MAX1574 - 180mA, 1x/2x, White LED Charge Pump in 3mm x 3mm TDFN | MAX1574.pdf | 3 | 2.7 to 5.5V | 1x, 2x | 60mA |
| MAX1574 - Application Note - Driving LEDs in Battery-Operated Applications: Controlling Brightness Power Efficiently | AN1804.pdf | 3 | ||||
| Monolithic Power Systems | MP1519L - High Efficiency Charge Pump 3 White LED Driver | MP1519L_r1.3.pdf | 3 | 2.5 to 5.5V | 1x, 1.5x, 2x | 20mA |
| Rohm Semiconductor | BD7700GU - Charge pump type for 300mA Flash | bd7700gu-e.pdf | 3 | 2.7 to 5.5V | 1x, 1.5x, 2x | 300mA |
| Texas Instruments | TPS60231 - 3-Channel, Current-regulated 75-mA Charge Pump for White LED Backlight in 3x3 QFN package | tps60231.pdf | 3 | 2.7 to 6.5V | 1x, 1.5x | 25mA |
| TPS60231 - User's Guide EVM-047 | sbvu009.pdf | 3 | ||||
| ↑ | ||||||
| Allegro MicroSystems Inc. | A8435 (High Efficiency Charge Pump White LED Driver) | 8435.pdf | 4 | 2.7 to 5.5V | 1x, 1.5x | 30mA |
| Analog Devices | ADM8843: Four White LED Backlight Driver | ADM8843.pdf | 4 | 2.6 to 5.5 V | 1x, 1.5x, 2x | 20mA |
| AustriaMicroSystems | AS3687XM - Flexible Lighting Management Unit with Audio synchronized LED Lighting patterns | AS3687_Features.pdf | 4 | 3.0 to 5.5V | 1x, 1.5x, 2x | 25mA |
| AustriaMicroSystems | AS3682 - 480mA flash LED driver and backlight | AS3682_Features.pdf | 4 = 1+3 | 3.2 to 5V | 1x, 1.5x, 2x | 480mA+160mA |
| AustriaMicroSystems | AS3683 - 1A flash driver | AS3683_Features.pdf | 4 = 1+3 | 3.0 to 5.5V | 1x, 1.5x, 2x | 480mA+160mA |
| Catalyst Semiconductor | CAT3604 - 4-Channel Regulated Charge Pump White LED Driver | 3604.pdf | 4 | 3.0 to 5.5V | 1x, 1.5x | 30mA |
| CAT3604EVAL1 Evaluation Board for the CAT3604 White LED Driver | an20.pdf | 4 | ||||
| Catalyst Semiconductor | CAT3604V - 4-Channel Quad-Mode® LED Driver with Open/Short LED Detection | 3604V.pdf | 4 | 2.4 to 5.5V | 1x, 1.33x, 1.5x, 2x | 30mA |
| Catalyst Semiconductor | CAT3614 - 4-Channel 1-Wire LED Driver in 3x3mm Package | 3614.pdf | 4 | 3 to 5.5V | 1x, 1.5x | 0 to 31mA |
| CAT3614EVAL1 Evaluation Board for CAT3614 1-Wire LED Driver | an29.pdf | 4 | ||||
| Catalyst Semiconductor | CAT3644 - 4-Channel Ultra High Efficiency Quad-Mode® LED Driver | 3644.pdf | 4 | 2.5 to 5.5V | 1x, 1.33x, 1.5x, 2x | 25mA |
| Catalyst Semiconductor | CAT3648 - 4-Channel Ultra High Efficiency Quad-Mode® LED Driver with 32 Dimming Levels | 3648.pdf | 4 | 2.5 to 5.5V | 1x, 1.33x, 1.5x, 2x | 25mA |
| Catalyst Semiconductor | CAT3224 - 4 Amp Supercapacitor Flash LED Driver | 3224.pdf | 4 = 2+2 | 2.5 to 5.5V | 1x, 2x | 200mA + 2A |
| Linear Technology | LTC3217 - 600mA Low Noise Multi-LED Camera Light Charge Pump | 3217fa.pdf | 4 | 2.9 to 4.5V | 1x, 1.5x, 2x | 150mA |
| Maxim | MAX1573 - White LED 1x/1.5x Charge Pump in UCSP and Thin QFN | MAX1573.pdf | 4 | 2.7 to 5.5V | 1x, 1.5x | 28mA |
| MAX1573 - Application Note - White-LED Boost Converter vs. Charge Pump | AN3243.pdf | 4 | ||||
| MAX1573 - Application Note - White-LED Driver Provides 64-Step Logarithmic Dimming | AN3287.pdf | 4 | ||||
| Maxim | MAX1575 - White LED 1x/1.5x Charge Pump for Main and Sub-Displays | MAX1575.pdf | 4 | 2.7 to 5.5V | 1x, 1.5x | 30mA |
| MAX1575 - Application Note - Driving LEDs in Battery-Operated Applications: Controlling Brightness Power Efficiently | AN1804.pdf | 4 | ||||
| Maxim | MAX8678 - White LED Charge Pump with 1.1W Audio Amplifier | MAX8678.pdf | 4 | 2.7 to 5.5V | 244mA | |
| Maxim | MAX8822 - Ultra-Efficient Negative Charge-Pump LED Driver with Dual LDOs in 3mm x 3mm Thin QFN | MAX8822.pdf | 4 | 2.7 to 5.5V | ||
| Monolithic Power Systems | MP1519 - High Efficiency Charge Pump 4 White LED | MP1519_r1.9.pdf | 4 | 2.5 to 5.5V | 1x, 1.5x, 2x | 20mA |
| Monolithic Power Systems | MP3000 - High Efficiency Charge Pump Single Pin Interface Quad White LED Driver | see website | 4 | 2.5 to 4.5V | 1x, 1.5x, 2x | 20mA |
| Monolithic Power Systems | MP3021 - Auto-Adjust Charge Pump White LED Backlight Driver | see website | 4 | 2.5 to 4.5V | 1x, 1.5x, 2x | 30mA |
| ON Semiconductor | NCP5604 - Current Mode Charge Pump LED Driver | NCP5604-D.PDF | 4 | 2.7 to 5.5V | 1.33x | 25mA |
| ↑ | ||||||
| Linear Technology | LTC3230 - 5-LED Main/Sub Display Driver with Dual LDO | 3230fa.pdf | 5 | 2.7 to 5.5V | 1x, 1.5x, 2x | 25mA |
| Linear Technology | LTC3210 - MAIN/CAM LED Controller in 3mm x 3mm QFN | 3210fa.pdf | 5 = 4+1 | 2.9 to 4.5V | 1x, 1.5x, 2x | 25mA + 400 mA |
| Linear Technology | LTC3210-1 - MAIN/CAM LED Controller with 64-Step Brightness Control in 3mm x 3mm QFN | 32101fc.pdf | 5 = 4+1 | 2.9 to 4.5V | 1x, 1.5x, 2x | 25mA + 400mA |
| Linear Technology | LTC3210-2 - MAIN/CAM LED Controllers with 32-Step Brightness Control in 3mm x 3mm QFN | 321023fa.pdf | 5 = 4+1 | 2.9 to 4.5V | 1x, 1.5x, 2x | 25mA + 400mA |
| Maxim | MAX1570 - White LED Current Regulator with 1x/1.5x High-Efficiency Charge Pump | MAX1570.pdf | 5 | 2.7 to 5.5V | 1x, 1.5x | 30mA |
| MAX1570 - Application Note - Charge-Pump and Step-Up DC-DC Converter Solutions for Powering White LEDs in Series or Parallel Connections | AN1037.pdf | 5 | ||||
| MAX1570 - Application Note - Why Drive White LEDs with Constant Current? | AN3256.pdf | 5 | ||||
| Maxim | MAX8630W, MAX8630X - 125mA 1x/1.5x Charge Pumps for 5 White LEDs in 3mm x 3mm TDFN | MAX8630-MAX8630X.pdf | 5 | 2.7 to 5.5V | 1x, 1.5x | 25mA |
| Monolithic Power Systems | MP3001 - Auto-Adjust Charge Pump White LED Backlight and Flashlight Driver | see website | 5 = 4+1 | 2.5 to 4.5V | 1x, 1.5x, 2x | 30mA + 250mA |
| Texas Instruments | TPS60230 - 5-Channel, Current-regulated 125-mA Charge Pump for White LED Backlight in 3x3 QFN package | tps60230.pdf | 5 | 2.7 to 6.5V | 1x, 1.5x | 25mA |
| TPS60230 - Application Notes - TPS60230 WLED Charge Pump | slva217.pdf | 5 | ||||
| TPS60230 - Users guide - EVM | sbvu008.pdf | 5 | ||||
| TPS60230 - White LED Charge Pump Used in Smart Phone Displays, LCDs, Keyboards | slvu165.pdf | 5 | 2.7 to 6.5V | 1x, 1.5x | 25mA | |
| ↑ | ||||||
| Allegro MicroSystems Inc. | A8434 (6-Channel High Efficiency Charge Pump White LED Driver for Main and Sub Displays) | 8434.pdf | 6 | 2.7 to 5.5V | 1x, 1.5x, 2x | 30mA |
| Allegro MicroSystems Inc. | A8530 (Ultracompact 6-Channel Backlight and Flash/Torch Driver) | 8530.pdf | 6 = 2+4 | 2.7 to 5.5V | 1x, 1.5x, 2x | 100mA+30mA |
| Analog Devices | ADM8845 - Charge Pump Driver for 6 White LED LCD Backlights | ADM8845.pdf | 6 | 2.6 to 5.5 V | 1x, 1.5x, 2x | 30mA |
| Catalyst Semiconductor | CAT3606 - 6-Channel Low-Noise Charge Pump White LED Driver | 3606.pdf | 6 | 3.0 to 5.5V | 1x, 1.5x | 30mA |
| CAT3606EVAL1 Evaluation Board for CAT3606 White LED Driver | an23.pdf | 6 | ||||
| Catalyst Semiconductor | CAT3616 - 6-Channel Charge Pump LED Driver with EZDim™ | 3616.pdf | 6 | 3.0 to 5.5V | 1x, 1.5x | 30mA |
| Catalyst Semiconductor | CAT3626 - 6-Channel LED Driver with I2C Interface | 3626.pdf | 6 | 3 to 5.5V | 1x, 1.5x | 0 to 32mA |
| CAT3626DB1 Evaluation/Demo Board for CAT3626 6-Channel LED Driver | an30.pdf | 6 | ||||
| Catalyst Semiconductor | CAT3636 - 6-Channel Quad-Mode® Fractional LED Driver in TQFN3x3 | 3636.pdf | 6 | 2.5 to 5.5V | 1x, 1.33x, 1.5x, 2x | 32mA |
| CAT3636DB1 Evaluation/Demo Board for CAT3636 6-Channel Quad-Mode® LED Driver | an33.pdf | 6 | ||||
| Catalyst Semiconductor | CAT3637 - 6-Channel Programmable High Efficiency Quad-Mode® LED Driver | 3637.pdf | 6 | 2.5 to 5.5V | 1x, 1.33x, 1.5x, 2x | 0 to 30mA |
| CAT3637 LED Driver Demonstration Board | AN38.pdf | 6 | ||||
| Linear Technology | LTC3200 - Low Noise, Doubler/White LED Driver | 32005f.pdf | 6 | 2.7 to 4.5V | 100mA | |
| LTC3200 - DN243 New Charge Pumps Offer Low Input and Output Noise | dn243f.pdf | 6 | doc | |||
| LTC3200 - Feb 2001 Charge Pump Powers White LEDs | LTC3200-5_0201_Mag.pdf | 6 | doc | |||
| Linear Technology | LTC3206 - I2C Multidisplay LED Controller | 3206f.pdf | 6 | 2.8 to 4.5V | 400mA | |
| LTC3206 - DC749 - LTC3206 Evaluation Kit | dc749A.pdf | 6 | ||||
| Maxim | MAX8647 - MAX8648 - Ultra-Efficient Charge Pumps for Six White/RGB LEDs in 3mm x 3mm Thin QFN | MAX8647-MAX8648.pdf | 6 | 2.7 to 5.5V | 24mA | |
| MAX8647 - MAX8648 - Application Note - Negative Charge Pumps Achieve Inductor-Like Efficiency for WLED Backlights | AN4187.pdf | 6 | doc | |||
| Maxim | MAX8821 - White LED Charge Pump with Mono Class D Audio Amp and Dual LDO | MAX8821.pdf | 6 | 2.7 to 5.5V | ||
| Microchip | MCP1252/3 - Low noise, Positive-regulated Charge Pump | 21752a.pdf | 6 | 2.1 to 5.5V | 25mA | |
| Semtech | SC606 - Low-Noise Smart Charge Pump LED Driver with Serial Interface | SC606.pdf | 6 | 3 to 5V | 1x, 1.5x, 2x | 20mA |
| Sharp Microelectronics Europe | IR2E53Y7 - 6 Segment LED Driver IC | IR2E53Y7.pdf | 6 | 3 to 4.5V | 1x, 1.5x | 25mA |
| ↑ | ||||||
| Rohm Semiconductor | BD6085GUL - 7 LEDs Flash and LDO 4ch | bd6085gul-e.pdf | 7 | 2.7 to 5.5V | 1x, 1.33x, 1.5x, 2x | 30mA |
| Rohm Semiconductor | BH6948GU - 7X7 (MAX 49LEDs) Dot-Matrix LED DRIVER | bh6948gu-e.pdf | 7 | 3.15 to 4.5V | 1x, 1.5x, 2x | 30mA |
| Semtech | SC614 - Low Noise Backlight and Flash LED Driver With Serial Interface | SC614.pdf | 7 = 4+3 | 3 to 5.5V | 1x, 1.5x, 2x | 30mA+100mA |
| Texas Instruments | TPS60255 - 7-Channel, High Efficiency 175-mA Charge Pump for White LED Backlight with 1 wire interface | tps60255.pdf | 7 = 1+6 | 2.7 to 6V | 1x, 1.5x | 80mA+25mA |
| TPS60255 - User Guide - EVM-262 | slvu241.pdf | 7 = 1+6 | ||||
| Texas Instruments | TPS60250 - High Efficiency Charge Pump for 7 WLEDs with I2C Interface | tps60250.pdf | 7 = 2+5 | 3.0 to 6V | 1x, 1,5x | 80mA+25mA |
| TPS60250 - Application Note - MSP430 Interface to TPS60250 via I2C Master Software | slva302.pdf slva302.zip |
7 = 2+5 | ||||
| TPS60250 - User guide - EVM-185 | slvu208a.pdf | 7 = 2+5 | ||||
| Texas Instruments | TPS60251 - High Efficiency Charge Pump for 7 WLEDs with I2C Interface | tps60251.pdf | 7 = 2+5 | 3.0 to 6V | 1x, 1.5x | 80mA+25mA |
| TPS60251- User Guide - EVM-192 | slvu209a.pdf | 7 = 2+5 | ||||
| ↑ | ||||||
| Linear Technology | LTC3209 - High Current Software Configurable Multidisplay LED Controller | 320912fa.pdf | 8 = 6/5 + 1/2 + 1 | 2.9 to 4.5V | 1x, 1.5x, 2x | 25mA + 200/400mA + 15mA |
| Maxim | MAX1576 - 480mA White LED 1x/1.5x/2x Charge Pump for Backlighting and Camera Flash | MAX1576.pdf | 8 = 4+4 | 2.7 to 5.5V | 1x, 1.5x, 2x | 30mA+100mA |
| MAX1576 - Application Note - Circuit Board Layout Guidelines for White LED Charge Pumps | AN3441.pdf | 8 = 4+4 | ||||
| MAX1576 - Application Note - Driving LEDs in Battery-Operated Applications: Controlling Brightness Power Efficiently | AN1804.pdf | 8 = 4+4 | ||||
| MAX1576 - Application Note - White-LED Driver Includes Overtemperature Protection | AN3871.pdf | 8 = 4+4 | ||||
| Maxim | MAX8631X, MAX8631Y - 1x/1.5x/2x White LED Charge Pump with Two LDOs in 4mm x 4mm Thin QFN | MAX8631-MAX8631Y.pdf | 8 = 4+4 | 2.7 to 5.5V | 1x, 1.5x, 2x | 30mA+100mA |
| Maxim | MAX8645X, MAX8645Y - 1x/1.5x/2x White LED Charge Pumps with Two LDOs in 4mm x 4mm TQFN | MAX8645X-MAX8645Y.pdf | 8 = 6+2 | 2.7 to 5.5V | 1x, 1.5x, 2x | 30mA+200mA |
| ↑ | ||||||
| Linear Technology | LTC3219 - 250mA Universal Nine Channel LED Driver | 3219fa.pdf | 9 | 2.9 to 5.5V | 1x, 1.5x, 2x | 28mA |
| LTC3219 - AN111 - LTC3219 User's Guide | an111f.pdf | 9 | ||||
| LTC3219 - DN422 - Tiny Universal LED Driver Can Gradate, Blink or Turn On Nine Individual LEDs with Minimal External Control | dn422f.pdf | 9 | ||||
| Sharp Microelectronics Europe | IR2E51Y7 - Auto-Brightness Control LED Drive | IR2E51Y.pdf | 9 = 4+2+3 | 3 to 4.5V | 1x, 1.5x | 27mA |
| ↑ | ||||||
| Maxim | MAX8879 - Charge Pump for Backlight/Flash/RGB LEDs with Safety Timer | MAX8879.pdf | 11 = 7+4 | 2.7 to 5.5V | 1x, 1.5x, 2x | 30mA+100mA |
| ↑ | ||||||
| Linear Technology | LTC3207 - 600mA Universal Multi-Output LED/CAM Driver | 3207fc.pdf | 13 = 12+1 | 2.9 to 5.5V | 1x, 1.5x, 2x | 28mA + 425mA |
| LTC3207 - AN108 - LTC3207/LTC3207-1 User’s Guide | an108f.pdf | 13 = 12+1 | ||||
| LTC3207 - Jun 2007 - Universal 12-Output LED Driver Controls 4-RGB LEDs | LTMag-V17N02-12-LTC3207-Henderson.pdf | 13 = 12+1 | ||||
| ↑ | ||||||
| Linear Technology | LTC3208 - High Current Software Configurable Multidisplay LED Controller | 3208fa.pdf | 17 | 2.9 to 4.5V | 1x, 1.5x, 2x | 100mA |
| ↑ | ||||||
| Linear Technology | LTC3220 - 360mA Universal 18-Channel LED Driver | 32201fb.pdf | 18 | 2.9 to 5.5V | 1x, 1.5x, 2x | 25mA |
| LTC3220 - AN115 - LTC3220/LTC3220-1 User’s Guide | an115fa.pdf | 18 | ||||